• Mini Controller and transceiver in one
• Receives commands from your X10 compatible IR Remote Control (Infrared), e.g. Philips Pronto, Logitech Harmony 555, 895, 1000, etc.
• Operate up to 16 X10 receivers via such compatible IR remote control
• Doubles as a stand-alone mini-controller
• Operate up to 8 X10 receivers via its own buttons on the unit
• Can be used directly by pressing the buttons on the Mini Controller/Transceiver (e.g. On/Off, Dim, All Off, etc.)
• Can be controlled wirelessly using an X10 RF signal (e.g. Marmitek RF remote controls EasyControl8 and EasyTouch35, wireless wall switch SS13, motion detector MS13, etc.)
• Sends signals over your electrical wiring. (No additional wiring required)
• Great for use in combination with the X10 compatible Philips Pronto and Logitech Harmony remotes.

Marmitek X10 commands can be given in different ways:

• Directly with the built-in key board inclusive 'dim', 'all lights on', and 'all units off' commands. You can operate max. 8 (eight) X10 modules then.
• With a universal infrared remote control which is X10 compatible.
  Depending on model: One for All, Philips Pronto, Thomson, Marmitek, Logitech Harmony, ...
• With any Marmitek X10 IRRF remote control. In this case the Mini Controller works as a Transceiver.

The IRRF 7243 control panel can be used for these applications:

• Switch appliances and lights on and off.
• Everything can be controlled in combination with Marmitek X10 modules, easy and without the need for extra wires.
• Ideal for switching off all the lights before going to bed, switching on an outdoor lamp or switching off TVs.
• Compatible with and extendable with all Marmitek X10 modules.
• Transfer infra-red and high-frequency signals from Marmitek wireless controllers (remote controls, wireless switches and wireless sensors) to the Marmitek X10 protocol on the mains.

• Supply voltage: 230V + 10% -15% - 50 Hz
• Standby power consumption: <= 2W
• X10 commands : All units off, all lights on, on, off, dim, bright
• Simultaneous actions to different addresses are possible.
• RF receiver Frequency: 433.92 MHz
• Operating temperature range: - 10° C to + 50° C
• Storage temperature range: - 20° C to + 70° C
• Dimensions: 115 x 95 x 30 mm
• Download brochure 
• Download manual (EN-D-FR-NL-ES-IT) 
• Download Pronto CCF File (zip file)

The IR7243 IR/RF Mini Controller is available with EURO plug and with UK plug. See details on plug types.

Not compatible with the RF part of Philips Pronto and Logitech Harmony remotes.