• WGL flagship X10 RF receiver
• Comes with external antenna for maximum range
• Provides a larger range than e.g. TM13 Transceiver
• The W800RF32 receives all 256 house/unit code addresses
• Works with all regular X10 RF commands (on, off, dim, brighten, etc.)
• Extended 32 bit RF commands, such as those transmitted by X10's security modules such as the DS90, MS90, KR21, ...
• Quick installation

The W800RF32AE RF receiver is designed to receive X10 RF signals generated from X10 products: Remotes, key chain remotes, motion detectors, and many, many other X10 RF devices.

The W800RF32AE RF Receiver then sends these commands directly to your computer's serial (RS232) port. This allows your computer to receive X10 RF commands from remotes and motion detectors directly, without having to broadcast any power line commands, thus minimizing power line clutter and improving home automation response times by bypassing the usual power line delay.

To use the W800RF32 you will need a dedicated computer (PC or Mac) to interpret the received commands and supported software, such as e.g. HomeSeer, XTension or Indigo

What do you get?

• W800RF32AE module, 433.92 MHZ
• Antenna, 433.92 MHZ, quarter wave whip
• Mounting bracket for antenna
• Coax cable
• Rs232 cable

Required for operation:

• Computer with a serial port. Com1 – com16 (works with USB serial port extenders).
• Power supply (not included):
  • Voltage : 7 - 12 vdc
  • Current : 50 mA
  • Connector : 3.5 mm male plug, (center positive)
• CM11 + Specific Automation software.
  
  The W800RF32AE is supported by the following Home Automation software packages:
  • Indigo 4.0 Lite (Macintosh/Macintosh OS X)
  • XTension (Macintosh OS X)
  • HomeSeer (Windows)
  • MisterHouse (Windows / Linux/ Macintosh OS X)
  • Home Control Assistant (Windows)
  • Powerhome (Windows)
  • HouseBot (Windows)
  • Doberman Security & Automation (Windows)
  • Girder (proximis) (Windows)
  • The xPL Monkey (Windows)
  • ECS (Windows & Linux)
  • Homevision (Windows)
  • mControl (Windows)
  • Adaptive Home Logic (Windows)
  • HeYu (Linux)

Electrical

• Controller Current : 20 ma
• Receiver Frequency : 433.92 mhz
• Receiver Range : 30 meter line of sight
• House/Unit Codes and Supported Commands : all 256 addresses, basic commands (On, Off, Bright, Dim, All Lights On, All Off), and all extended commands/functions
• Data Output Format : RS-232, 4800 baud, 8 bit, no parity, 1 stop bit. Details on the communication protocol

Connections

• Power : 3.5 mm plug (center +)
• RS-232 : DB9 female DTE pinout TD, RD, & SG
• Antenna : male F connector

Mechanical

• Size : 2.5" x 1.7" x 1.0"
• Weight : 2 oz

• Comes without Power supply. You can source a power supply locally, according the plug specifications of your country.
  The power requirements are
  
  • Voltage : 9 vdc
  • Current : 50 ma
  • Connector : 3.5 mm male plug, (center positive)
• Not CE approved