• Tiny wireless X10 Passive Infrared Sensor
• Signal is transmitted straight through walls and ceilings
• Suitable for sheltered outdoor use
• With built-in light/dark sensor
• Great for presence simulation
• Turn your lights on without using a remote or wall switches
• Activate lighting sequences

• Walk into a room and the lights go ON!
• Switch on outdoor and indoor lights when you come home in the evening.
• Switch X10 Appliance or Lamp Modules via movement.
• Adjustable time delay of 1-256 minutes between motion stopping
  and the OFF signal.
• Save energy by turning off lights and appliances when you're not in the room
• Light the path to your destination, e.g. toilet
• Protect your home by early warning of unexpected visitors
• With the CM15 Computer Interface you can set up macros to run when the MS13 senses "occupancy" or not. With the CM15 time-delay feature you could have sequenced lighting.
• Ideal when you're on holiday to simulate your presence.

How it works?
The MS13 motion detector sends radio signals to an X10 transceiver
(e.g. TM13, SC9000 Alarm station or CM15Pro computer interface).

The transceiver or station then transmits these signals wirelessly via the electric cabling that is already in your house to switch lights (or appliances) that are connected to X10 receivers ON and OFF.

The MS13 can also be programmed to detect motion both at night and during the day, or only at night. The Marmitek X10 MS13 can also be used to detect the transition from light to dark and vice versa. The light levels of dusk and dawn are pre-set and cannot be changed.

• Power: 2 x AAA alkaline batteries (not included)
• RF frequency: 433,92 Mhz
• RF range : Up to 30 m (free field), up to max. 20 m through walls and ceilings
• Ouput: 1mW
• PIR range: 12 meters at 0° / 5 m at 45°
• Operating temperature range: - 10° C to + 30° C
• Storage temperature range : - 20° C to + 70 ° C
• Splashwaterproof
• Dimensions: 67 x 67 x 27 mm
• Download manual

To be used with a Transceiver module such as TM12/TM13 or an alarm console SC2800 or SC9000 or with the new CM15PRO PC Interface. This detector is NOT compatible with the security features of the X10 alarm systems!

Not compatible with HomeGuard MS8000.