• Plug-in X10 receiver module
• ON/OFF control
• Control lighting (also halogen) and appliances
• Also suitable for low energy lamps and sirens
• Switches ohm loads up to 3600W
• Available in most 220V European type outlets. We automatically ship the right plug for the country of delivery.  More info.
• Download product brochure

• Plug-in module for switching appliances, halogen and fluorescent lighting
• ON / OFF control.
• Switches ohm loads up to 3600W.
• Controllable from a distance with X10
  through the existing house wiring (On/Off).
• The easiest way to automate Christmas lights, radios, fans,
  air conditioners and lights over 300 watts
• Works with your home's existing wiring — no new wiring required

How does it work?

Simply plug the appliance into the module and then plug the module into your normal mains outlet socket. Set the code switches for the House code and the Unit number to suit the controller you are using and the module is ready to work. It is ideal to use with any appliance in the house or the business.

New to X10 Home Automation?

Click here to learn more about X10 home automation
and the many possibilities.

• Supply voltage: 230V / 50 Hz
• Supply current: < 20mA capacitive
• Making capacity:
  3600W ohm load / resistive loads
  500W (incandescent lamps and halogen light)
  230W inductive/capacitive (motors)
• Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
• Input impedance: >180 ohm (L-N) at 120 kHz
• Operating temperature: - 10° C to + 50° C
• Storage temperature: -20° C to + 70° C
• Dimensions: 52 x 122x x33 mm (without plug)
• Download Product Manual

The AM12 Appliance Module is available in most 220V European type outlets, suitable for the specific type of outlet in your country. We automatically ship the right plug for the country of delivery.
More info.

The AM12 does not respond to the command ‘All Lights On’. Only Lamp modules will respond to the command ‘All Lights On.’ This is to prevent events such as the coffee machine being turned on by accident.
Appliance modules do respond to the command ‘All Units Off’.

NOT fitted for LED Lighting!