- Makes your X-10 system invisible.
- Remote and local control On and Off.
- Transforms your existing switch into a X-10 controllable switch.
- Switch module to turn 230V appliances, halogen and tube lights, etc. on or off.
- Can be used in combination with ‘designer’ switching material.
- Operation of the unit with Marmitek X-10 Commands takes place via the mains wires, which means no extra wiring is necessary.
- Controllable from a distance with the Marmitek X-10 commands On/Off.
- Makes your X-10 system invisible.
- Transforms your existing switch into a X-10 controllable switch.
- Remote and local control On and Off.
- Can also be used with low-energy lamps.
- Quick and easy to install and program.
- Control Load QTY: Two
- Supply voltage: 230VAC +10% -10% 50 Hz
- Power consumption: < 1W
- Making capacity: 1800W for resistive (ohm) load / 300W for inductive/capacative load
- Control Load QTY: Two
- Dimmable: No
- Signal sensitivity: Better than 25 mVpp at 120 kHz
- X10 Key codes to respond to: All units OFF, All lights ON, ON, OFF
- X10 All Lights ON by set: Yes
- Input switch: Double 1-way standard rocker switch
- Silent relais: Yes
- Use in 3 phase installation: FD10 (3X) or FKX40 necessary
- Connections: Wire for a standard rocker switch or momentary switch and connecting clamps for phase, neutral and switched phase.
- Control lines: not more than 1 meter between the micro module and the switch.
- Ambient temperature: -10°C to +50°C (operation)
- Dimensions: 51 mm x 49 mm x 20 mm
|