- Built-in Appliance micromodule
- Switches loads up to 3.600W (resistive load)
- Makes your X10 system invisible
- Remote control ON/OFF
- Local control with wall switch (make/break or momentary)
- Works with X10 controllers
- One-Way X10
- Can be used in a 3-way switch (also known as a hotel-switch)
- So small it can be fitted behind any installed switch
- Control lights and appliances connected to the AW12 remotely
- Continue to use your switch in the normal way
- The AW12 uses one-way X10 communication.
- Can be programmed to respond to the functions:
"All Lights On/All Lights Off" and "All Units Off"
- When power is lost the module will retain the state it was in before the loss.
- Download PDF "Overview Micromodules" to learn more about the benefits of micromodules and how they can be fit in your installation.
- Programming mode can be activated in 2 ways:
- By transmitting On / Off commands of the set address in quick succession (With every X10 compatible controller, e.g. EasyControl8 in combination with TM13 transceiver, EasyTouch35 with CM15Pro, ..., except CM11)
- By quickly pressing/switching the connected (momentary) switch.
- This product is for professional use only.
Please consult a qualified electrician if you do not have the technical skills or if you have any doubts about proper installation.
- The AW12 can be controlled by the CM11 PC interface, but it can NOT be programmed with it.
|