• Universal switch module
• Switches 24V DC with power up to 5A
• Transforms an X10 signal into a switch contact
• Control your own low-voltage applications
• Remote switching of your equipment
• With built-in buzzer (can be switched off)
• Can be installed for pulse or continuous contact
• Controllable from X10 commands On/Off
• Controllable by hand with pushbuttons on the module itself

• Can be used to control something triggered by a contact closure
• or you can switch a low voltage through the contacts of the module.
• Control your own low-voltage applications
  (e.g. Garage doors, Watering systems, Drapery control, Window openers, Electronic projects, Security, Signaling device,...)
• If you have electronic devices that cannot adequately be controlled by a standard appliance or lamp module, you can use this UM7206 relay module. It has a standard low-voltage relay which is controlled by X10 signals.
• The unit has a built-in beeper that can be used as an annunciator or additional wake up alarm when used with a Mini Timer Controller. It can be set to operate for momentary or sustained contact closure.
• The module is powered and controlled via the 230V lighting circuit and is fitted with a mains power lead.

Depending on your application, the X10 Universal Module can close a contact momentarily when an ON signal is sent, or indefinitely until an OFF signal is sent. It can even beep when responding to signals, if you choose.

Examples of use:

• Unlock the door for your kids without getting out of your seat
• Keep your lawn green and healthy with automatic sprinkler control
• Close the garage door without stepping outside
• Other items that may be controlled by the X10 Universal Module include:
  Garage door openers, thermostats, electric door strikes, speakers, watering systems, telephones, drapery controls, HVAC dampers, window openers, security devices, electronic ignition fireplaces, signaling devices and more.

• Supply voltage: 230 V / 50 Hz
• Supply current: < 20 mA capacitive
• Switching power: 5 A at 24 V DC
• Responds to X10 commands: On, Off
• Signal sensitivity: 15 mVpp min 50 m Vpp max at 120 kHz
• Input impedance: > 55 ohm (L-N) at 120 kHz
• Operating temperature: -10°C to +50°C
• Storage temperature: -20°C to +70°C
• Connectors: 2 x screw connector
• Dimensions: 55 x 90 x 38 mm
• Download Folder - Dowload Manual

The UM7206 Universal Receiver Module is available with EURO plug and UK plug.  See details on plug types.

The terminals are exposed, therefore for safety you should not connect voltages higher than 24VDC to these terminals, because this causes a shock hazard.