Reference: IH07603
104,7 Euro
£ 97,85
Quantity
 Add to cart
|
ZAX12 Sun blind actuator
Commercial Information
 - The ZAX12 is a sun blind actuator with interface equipped with 230V inputs that can be used for easy automation of electrically operated sun blinds, roll-down shutters, curtains and screens based on 230V motors.
|
|
- Four 230 V inputs
- Maximum load 2.5 A, 230 VAC (motors)
- Freely programmable address for operation of the motor
- Freely programmable Preset address
- Block all operation temporarily
- Responds to ON/OFF/BRIGHT/DIM and EXTENDED commands
- Can be programmed remotely
Connection and operation
The ZAX12 module must be fitted in junction or distribution boxes and can be used in combination with:
- Retractive switches with two normally open contacts for Up/Down operation
- Retractive switches with four normally open contacts for Up/Down operation in combination with the Preset and Lock function
- Rated voltage 230 Vac, 50 Hz
- Contact rating 230 Vac 2.5 A
- Protection : Continuous operation time: maximum of 4 minutes.
Temperature protection output.
- Total power consumption : < 1 W Cartridge fuse
- Radial lead micro fuse, 4 AT, according to IEC 60127-3, standard sheet 4
- Current consumption : < 30 mA capacitive
- Signal transmission : > 5 Vpp in 5 Ohm at 120 kHz in accordance with EN 50065-1, EN 50065-2-1, EN 50065-4-1
- Transmission synchronisation 1 pulse burst at 0°/180°
- Signal sensitivity : 25 mVpp-6 Vpp at 120 kHz ± 4 kHz
- Signal/noise ratio : 1.35 : 1
- Connection range : Up to 2.5 mm2, tightening torque 0.5 Nm
- Minimum ambient temperature : 0 °C
- Maximum ambient temperature : 40 °C (**) (***)
- Atmospheric pressure : 86 pkA - 106 pkA
- Relative humidity (non condensing) : 30 tot 90%
- Standards : NEN-EN-IEC 60669-2-1, NEN-EN-IEC 60669-2-2
- Marking : CE
- Download manual
|