- 3-piece pc based starter kit, easy to expand!
- Kit contents : CM15Pro, LM12, AM12
- Works with the PC switched off!
- No need to install special wiring.
- Just plug the modules into an electrical outlet and go!
- Sold separately : 159,85 € - You Save : 30,85 € (-19,3%)
- Control lamps and appliances with X10 home automation modules
- Set up timed events and you'll never have to walk into a darkened room when your home automation system knows you'll be there
- User-friendly interface means anyone can master simple home automation and create new routines
- Wireless so you'll never have to trip over extra wiring, the ActiveHome Pro home automation system even works when your computer is off - simply program a timer or macro and your home automation system will remember it, so you can control your entire home by remote
- ActiveHome Pro's dawn/dusk controls do the thinking for you - your night and morning routines can automatically adjust for the changing times of sunrise and sunset throughout the year, so you won't have to worry about reprogramming your driveway lights when it starts getting darker in the winter
- Use your ActiveHome Pro home automation system as basic home security! ActiveHome Pro can automatically adjust scheduled timers to turn on lights for a random number of minutes when you're not at home, giving your home that "lived-in" look
- It's easy to track home automation routines - ActiveHome Pro software lets you sort by rooms, so you can easily see what's scheduled to happen.
Kit contents :
- 1 x CM15Pro Computer Interface with professional activehome software
- 1 x LM12 Plug-in X10 receiver for controlling incandescent light(s)
- 1 x AM12 Plug-in X10 receiver for controlling electric appliances such as a radio or a heater, also suitable for halogen lamps and lights over 300W.
The system can be expanded endlessly by adding more X10 modules.
|
New to X10 Home Automation?
 |
Click here to learn more about X10 home automation
and the many possibilities. |
|
CM15 Pro Computer Interface
- Power: 230 VAC 50 Hz, 7 Watt
- Backup battery: 1x 9V 6LR61 alkaline block battery
- Backup time: 1 week typ
- Supply current : <30 mA
- X10 Powerline: 120 kHz +/- 2 kHz / 2.5 Vpk-pk
- Signal sensitivity: 15 mVpp min, 50 mVpp max at 120 kHz
- Signal / noise ratio 1,35 : 1
- X10 transmission: 1 pulse burst at 0, 60 and 120 degrees.
- X10 Key codes it can transmit: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 0, Extended Code 1 type 3, Hail Acknowledge, Pre-Set Dim, Status Request, RF commands
- X10 Key codes to respond to: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 3, Hail Request, Pre-Set Dim, Status Request, RF commands
- X10 Collision detection: Present
- Input impedance: > 180 Ohm (P-N) at 120 kHz
- RF Range: 30 meters (note: the unit should be mounted at a height of 1 metre for best performance and located away from any sources of RF interference such as computers, monitors, etc).
- RF Power: 10 mW (maximum)
- RF receiver frequency: 433,92 MHz
- RF transmitter frequency: 433,92 MHz
- Ambient temperature: -10° C - +50° C (operation) -20° C - +70° C (storage)
- Dimensions: 66.7 (w) x 113.5 (L) x 45.3 (H)
- Download manual
AM12 Appliance Module
- Supply voltage: 230V / 50 Hz
- Supply current: <20mA capacitive
- Making capacity:
- 3600W ohm load / resistive loads
- 500W (incandescent lamps and halogen light)
- 230W inductive/capacitive (motors)
- Attention : Not suitable for LED lights
- EMC Emission: according to EN 50081-1
- EMS Emmission: according to EN 50082-1
- Electrical safety: according to EN 60950 and EN 60065
- Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
- Input impedance: >180 ohm (L-N) at 120 kHz
- Ambient temperature: - 10° C to = 50° c (operation) /
-20° C to + 70° C (storage)
- Dimensions: 52 x 122x x33 mm (without plug)
- Download Folder - Download Manual
LM12 Lamp Module
- Supply voltage: 230V / 50 Hz
- Supply current: <20mA capacitive
- Making capacity: 60 - 300 W (incandescent lamps only)
- EMC Emission: according to EN 50081-1
- EMS Emmission: according to EN 50082-1
- Electrical safety: according to EN 60950 and EN 60065
- Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
- Input impedance: > 55 ohm (L-N) at 120 kHz
- Ambient temperature: - 10° C to = 50° c (operation) /
-20° C to + 70° C (storage)
- Dimensions: 52 x 122x x33 mm (without plug)
- Download Folder - Download Manual
The LM12 Lamp Module and the AM12 Appliance Module are available in most 220V European type outlets, suitable for the specific type of outlet in your country. We automatically ship the right plug for the country of delivery. More info.

ActivehomePro Software in English only!
|