- Motion activated lighting control
- 3-piece pc based starter kit, easy to expand!
- Turns lights ON automatically when motion is detected
- Plug-in receiver activates any incandescent light
- MS13 motion sensor works inside or outside (sheltered)
- MS13 with built-in light/dark sensor
- Perfect for your basement, attic or back porch.
- Sold separately : 169,85 € - You Save : 30,85 € (-18%)
- Receive a visual alert when a visitor arrives at your home.
Turn on a lamp inside your house when someone is approaching your home
- Light turns on automatically when motion is detected, prevent yourself from walking into a dark room;
- automatically lighten the hallway when it's getting dark (Built-in light/dark sensor);
- Protect your home from break-ins during the holidays by turning your lights on at night to cover the sides and back of your house.
Kit contents :
- CM15PRO Computer Interface USB
- LM12 Plug-in Lamp Module
- MS13 Motion detector
The wireless motion detector that comes with this kit is designed for indoor and outdoor (sheltered) use! It can automatically turn on lights when motion is detected, e.g. when entering a room. It can also turn on lights at dusk and turn them off at dawn!
When motion is detected, the MS13 sends a signal to the CM15Pro Computer Interface that will automatically turn on the light that is connected to an X10 lamp module (LM12).
The system can be expanded endlessly by adding more X10 modules.
New to X10 Home Automation?
 |
Click here to learn more about X10 home automation
and the many possibilities. |
|
Computer Interface CM15PRO
- Power: 230 VAC 50 Hz, 7 Watt
- Backup battery: 1x 9V 6LR61 alkaline block battery
- Backup time: 1 week typ
- Supply current : <30 mA
- X10 Powerline: 120 kHz ± 2 kHz / 2.5 Vpk-pk
- Signal sensitivity: 15 mVpp min, 50 mVpp max at 120 kHz
- Signal / noise ratio 1,35 : 1
- X10 transmission: 1 pulse burst at 0, 60 and 120 degrees.
- X10 Key codes it can transmit: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 0, Extended Code 1 type 3, Hail Acknowledge, Pre-Set Dim, Status Request, RF commands
- X10 Key codes to respond to: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 3, Hail Request, Pre-Set Dim, Status Request, RF commands
- X10 Collision detection: Present
- Input impedance: > 180 Ohm (P-N) at 120 kHz
- RF Range: up to max. 30 meters (note: the unit should be mounted at a height of 1 metre for best performance and located away from any sources of RF interference such as computers, monitors, etc).
- RF Power: 10 mW (maximum)
- RF receiver frequency: 433,92 MHz
- RF transmitter frequency: 433,92 MHz
- Operating temperature range: -10°C - +50°C
- Storage temperature range : -20°C - +70°C
- Dimensions: 66.7 (w) x 113.5 (L) x 45.3 (H)
- Download manual
Lamp Module LM12
- Supply voltage: 230V / 50 Hz
- Supply current: <20mA capacitive
- Making capacity: 60 - 300 W (incandescent lamps only)
- Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
- Input impedance: > 55 ohm (L-N) at 120 kHz
- Operating temperature range: - 10° C to + 50° c
- Storage temperature range : -20° C to + 70° C
- Dimensions: 52 x 122x x 33 mm (without plug)
- Download Manual
Presence Detector MS13
- Power: 2 x AAA alkaline batteries (not included)
- RF frequency: 433,92 Mhz
- RF range : Up to 30 m (free field), up to max. 20 m through walls and ceilings
- Ouput: 1mW
- PIR range: 12 meters at 0° / 5 m at 45°
- Operating temperature range: - 10° C to + 30° C
- Storage temperature range : - 20° C to + 70 ° C
- Splashwaterproof
- Dimensions: 67 x 67 x 27 mm
- Download manual
The LM12 plug-in lamp module is available in most 220V European type outlets. We automatically ship the right plug for the country of delivery.
See details on plug types.

|