• 5-piece pc based starter kit, easy to expand!
• Kit contents : CM15Pro, Indigo V 4.0 Lite, AM12, LM12, EasyControl8
• Turn your Mac into an intelligent home control server
• No need to install special wiring.
• Just plug the modules into an electrical outlet and go!
• Remotely control lights & appliances, from your iPhone or iPod touch using Indigo Touch, from any Web browser and from a variety of handheld remote controls.
• Sold separately : 259,80 € - You save : 49,85 € (-19%)

• Control your electronics manually, remotely
  or based on timed or conditional variables
• Control groups of lights with only one switch
• Automate your waking or bedtime routines
• Control appliances from remote locations
• Home Automation helps you better regulate your utility costs
• Protect your home while you are away
• Easy control of electrical devices and lights that are difficult to reach

Automating your home—so the lights turn on automatically when darkness falls, the heat turns on a half an hour before you’re due home, or a security camera watches the house while you’re out—isn’t that hard to do. With a spare Mac and a bit of extra hardware, you can do it in a weekend.

The Indigo Software V 4.0 Lite (Full Version)
Macintosh Home Automation and Control Server.
Indigo is an intelligent home control server that integrates an assortment of popular X10 hardware devices to provide unprecedented control of your home. Using Indigo’s intuitive user interface* you can quickly define complex control logic to automate your home.  Read more 

LM12 Lamp module :
The basic lamp module LM12 allows you to turn lamps on and off, or dim and brighten. A good module for getting to know the basics of X10 Home Automation. Read more

AM12 Appliance Module
The appliance module is a simple on/off switch. This is useful for simple appliances or for lighting that cannot be dimmed, such as halogen lighting on a transformer. Suitable for all your electric appliances such as a radio, a fan or a heater. Read more 

EasyControl 8
This EasyControl8 universal remote control is adapted to all audio video appliances and your X10 home automation system. You can use it to dim and switch lights and control other appliances (such as sun blinds and screens) without getting up out of your chair!  Read more

CM15 Pro Interface
Indigo can communicate with dozens of different home automation modules, providing control of lighting, lamps, appliances, sprinklers and more. Indigo communicates with these X10 compatible modules by using the CM15 computer interface. The CM15Pro interface directly communicate with the modules by receiving and sending X10 signals on your power lines.

The CM15Pro is also a transceiver module, allowing you to receive RF commands from the EasyControl8 remote control and other Wireless Marmitek X10 controllers. Read more

Indigo V 4.0 - System Requirements

• Mac with either an Intel or PowerPC G4 (or higher) processor
  and Mac OS X 10.4.11 or higher

Universal A/V Remote EasyControl 8

• Power : 2 x AAA Alkaline batteries (batteries are not included)
• Learning Memory : Maximum of 150 keys, 25 keys per mode
• Range : infrared: 3-8 m, RF : 15-30 m
• Home Theatre Macros: 3 Macro keys, max. 10 commands per macro key
• Download manual

Appliance Module AM12

• Supply voltage: 230V / 50 Hz
• Supply current: <20mA capacitive
• Making capacity:
  • 3600W ohm load / resistive loads
  • 500W (incandescent lamps and halogen light)
  • 230W inductive/capacitive (motors)
• Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
• Input impedance: >180 ohm (L-N) at 120 kHz
• Operating temperature: - 10° C to + 50° C
• Storage temperature : -20° C to + 70° C
• Dimensions: 52 x 122x x33 mm (without plug)
• Download Folder - Download Product Manual

Lamp Module LM12

• Supply voltage: 230V / 50 Hz
• Supply current: <20mA capacitive
• Making capacity: 60 - 300 W (incandescent lamps only)
• Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
• Input impedance: > 55 ohm (L-N) at 120 kHz
• Operating temperature: - 10° C to + 50° C
• Storage temperature :  -20° C to + 70° C
• Dimensions: 52 x 122x x33 mm (without plug)
• Download product brochure - Download Manual

The Lamp Module LM12 and Appliance module AM12 are available in most 220V European type outlets, suitable for the specific type of outlet in your country. More info.

CM15Pro Computer Interface

• Supply voltage : 230 VAC 50 Hz, 7 Watt
• Supply current : <30 mA
• Backup battery: 1x 9V 6LR61 alkaline block battery
• Backup time: 1 week typ
• X10 Powerline: 120 kHz ± 2 kHz / 2.5 Vpk-pk
• Signal sensitivity: 15 mVpp min, 50 mVpp max at 120 kHz
• Signal / noise ratio 1,35 : 1
• X10 transmission: 1 pulse burst at 0, 60 and 120 degrees.
• X10 Key codes it can transmit: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 0, Extended Code 1 type 3, Hail Acknowledge, Pre-Set Dim, Status Request, RF commands
• X10 Key codes to respond to: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 3, Hail Request, Pre-Set Dim, Status Request, RF commands
• X10 Collision detection: Present
• Input impedance: > 180 Ohm (P-N) at 120 kHz
• RF Range: up to max. 30 meters (note: the unit should be mounted at a height of 1 metre for best performance and located away from any sources of RF interference such as computers, monitors, etc).
• RF Power: 10 mW (maximum)
• RF receiver frequency: 433,92 MHz
• RF transmitter frequency: 433,92 MHz
• Operating temperature range: -10°C - +50°C
• Storage temperature range: -20°C - +70°C
• Dimensions: 66.7 x 113.5 x 45.3 mm (W x L x H)
• Available with EU and UK plug. See details
• Download manual

You must leave your Mac running for X10 home control.