• Complete security Kit easy-to-install by anyone.
• Includes built-in motion detector
• Built-in telephone dialer: system automatically dials,
  neighbours, friends, your own GSM, etc...
• You can select up to 3 telephone numbers
• Remote control with Arm/Disarm and Panic functions.
• Extra hard-wired input for external sensors,
  like smoke-detector, gaz-detector, etc.
• Silent alarm : possibility to switch off siren

Protect your house and family with the help of your Mobile phone.
Peace of mind for relatives of ill or elderly persons.
The Marmitek X10 HomeGuard is an easy to install Security System with built-in telephone dialer. System sends a pre-recorded voice message to your mobile phone, or other designated number (such as a friend or neighbour’s phone), when the alarm is triggered. The HomeGuard has a built-in Motion Sensor and a 90 dB siren. Wired sensors can be connected to the HomeGuard. The HomeGuard is a very effective and economical Security System. A price breakthrough for Security Systems with built-in telephone dialer!
Can be used as a panic alarm for those who are 'Home Alone' as the PIR and siren can be disabled independently.
Ideal to protect your garage or small appartment.

Smoke Detector Expand your X10 alarm system with this wireless smoke detector! Protect your family and your property with these easy to install wireless smoke detectors! The number of smoke detectors you can connect is unlimited.
Key Chain remote Up to 4 remotes* can be used on the Homeguard system - allowing one per room or one for each member of the family if required. (* only 3 if you combine the system with 1 or more smoke detectors)

Installation instructions

Homeguard control unit
Plan carefully in advance!
The Homeguard control unit is only to be operated in dry indoor areas. When considering possible places of installation for the control unit, please consider the following points:

• choose a place for the control unit so that an intruder can be recognised at the earliest possible moment
• there must be a 230V mains socket and a telephone socket near the control unit
• do not mount the control unit on a metallic surface
• do not situate the control unit directly alongside electrical appliances such as a radio or television set, computer, monitor or other domestic appliances. The radiation given off by such appliances can greatly reduce the range of the radio remote-control units.
• Do not enter any of the public emergency phone numbers in the telephone dialling unit - this is forbidden by law
• Operating radio transmitters on the same frequency (e.g. cordless headphones) can greatly reduce teh range of the radio remote-control units.

The Infra-red motion detector

• the infrared motion detector built into the control unit reacts to changes in heat caused by movement of a human being within the operating range of the unit, which then triggers off an alarm.
• the HomeGuard is usually best positioned at a height between 1.9 and 2.3 metres.
• because the motion detector reacts to any change in heat, there should not be any heat sources within its range of coverage.

Download Product Brochure

Control Unit

• Coverage area movement detector : 110° of arc / 12 meters radius
• Operating voltage : 230V/50hz - 12V mains adapter plug
• Emergency power battery :
  9 V block battery 20 hours standby with Lithium battery
  12 hours standby with Alkaline battery
• Automatic telephone : Analogue dialling unit
• Dialling unit :
  3 telephone numbers, each with a max. of 16 digits
  9 seconds permanently recorded alarm text
• Sirens : 95 dB/1m, can be switched off
• Remote control units: Maximum of 4 Key chain remotes (IH8040) can be used
• External input: for triggering the automatic telephone dialling unit via a non-voltage contact
• LEDs: 2, for displaying status

IH8040 - Key Chain Remote KR21

• Arms and disarms the security system
• CE mark
• 2 years operating life using 2 x alkaline AAA bateries (not included)
• Dimensions: L63-W40-D120 mm

Print info