• Ideal to deter intruders
• Automatically activates a high quality digital recording
  of a dog barking when an intruder approaches
• Very realistic--barking - Click here to listen
• Automatically turns on a light a few seconds after
  (through included Lamp Module)
• Automatically turns on lights at dusk and off again at dawn
• Can be used as X10 Transceiver
  with the full range of X10 Home Automation products

This Kit includes : 1 x Barking Dog Console Rex10, 1 x DM10 Motion Detector (suitable for inside and outside use), 1 x LM12 Lamp Module and 1 x KR22 Keychain Remote control

X10's barking dog alarm has always been a favorite with X10's customers. Its ingenious design allows you to trigger a frightening dog bark by motion or keychain remote.

Product Uses:

• Use Barking Dog to scare off prowlers
• Protect your home while you are on vacation! Easy to simulate presence!
• Take it with you! Renters this is an excellent security system for you!
• Use Barking Dog while you're away!

Kit contents:

	Barking dog console - more info Your own electronic watchdog! Listen to Barking dog, click here The dog can be tripped by the DM10 motion detector or manually from the key chain remote control KR22. When activated by the DM10 motion detector, he will bark for 4 minutes.
	Outside motion detector DM10 - more info Can trigger the Barking Dog to bark whenever someone walks by. You can also use the Motion Detectors to turn on lights automatically or have The Barking Dog bark, then few seconds later, the lights go on!
	Lamp Module LM12 - more info Can be triggered by the Barking Dog whenever someone walks by. The lights will turn on few seconds later after the dog starts barking. This to increase realism and to give the impression someone is at home.
	Key chain Remote KR22 - more info A beautiful slim design Remote Control, which you can use to control the barking dog, but also to turn on the lights. The remote can control 4 addresses and includes a dim function.

BASE UNIT

• AC supply: 220 VAC/50 Hz
• Batteries: 9 x ‘C ’ cells
• RF receiver frequency: 433 MHz
• X10 Powerline: 120KHz/2.5 V pk-pk
• Approvals: CE Mark

PIR MOTION DETECTOR DM10

• PIR Detection Range : 90°/12m
• RF Range : 30 meters open field/ 10-20 meter through walls and ceilings
• Batteries:4 x ‘AA ’ cells
• RF frequency:433 MHz
• Approvals:CE Mark -ETS300220

LM12 Lamp Module

• Supply voltage: 230V / 50 Hz
• Supply current: <20mA capacitive
• Making capacity: 60 - 300 W (incandescent lamps only)
• EMC Emission: according to EN 50081-1
• EMS Emmission: according to EN 50082-1
• Electrical safety: according to EN 60950 and EN 60065
• Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
• Input impedance: > 55 ohm (L-N) at 120 kHz
• Ambient temperature: - 10° C to = 50° c (operation) /
  -20° C to + 70° C (storage)
• Dimensions: 52 x 122x x33 mm (without plug)

KR22 Key Chain Remote Control

• Batteries: 2x CR2016, 3V lithium
• RF frequency: 433.92 MHz
• RF operating range: 15-25 m (open field)
• Approvals: CE Mark

Barking Dog console only available with EU power supply.
This offer an not be combined with the use of a discount code/savings certificate!