- Wireless colour camera for expanding your Gigacam 4 Set
- Sturdy aluminium camera casing
- Easy to install
- For use in- or outside (IP44 class - aluminium housing)
- 64° Wide-angle lens
- Min. 3 lux
Can be used in- or outside. The Housing is according to the IP44 norm. You can install it outside, but best in a sheltered location, under a rooftop eg.
You can combine up to 4 cameras with one receiver (see GigaCam 4 Set). The receiver will then automatically
switch between the camera images. Every camera should be set to a different channel
number.
You can have the receiver switch between images of multiple cameras by setting more than
one of the channel switches on the receiver to ON. The switch time is 4 or 8 seconds,
depending on the setting of the interval switch (T).
- Camera element: 1/3” CMOS colour
- Lens: F 1.8/f6.0mm 64° wide-angle lens
- Video system: PAL
- Number of pixels: 628(H) x 582 (V)
- Resolution: 380 screen lines
- Min. Illumination: 3 lux
- Microphone: Electret Condenser
- Transmission power: 10 dBm
- IP Class: IP44
- 2.4 GHz frequencies: 2.411 GHz / 2.432 GHz / 2.453 GHz / 2.473 GHz
- Power: 12VDC, 500mA
Only for expansion of a GigaCam 4 Wireless colour camera set.
When used with a wireless network (WLAN), some interference may occur.
Both systems use the same frequency band (2.4GHz).
The GigaCam4 can use different channels within the frequency band (A, B, C, D). (Probably you can choose different channels too on your WLAN). Choose the channel that produces the least interference.
|