FAQs

Welcome to our support portal

Frequently Asked Questions

  1. There are no frequently asked questions was found.

Latest Questions

  1. What is included with the purchase of a Zipato Controller and what's more in the Pro License?

    Click here for a complete overview.

    Read more
  2. Is it possible to operate Lightify Osram lamps with Zipatile controller without requiring the use of the Osram gateway ?

    The Zipatile with Zigbee can do this, like the Zipabox with Zigbee expansion module.

    Read more
  3. Do you wish to continue to use X10? Here are some useful tips.
    • For those who wish to continue to work with X10, you can do this by, for example, buying Insteon products. Many Insteon products also have a X10 modus, so that they can receive X10 signals. (only over thge powerline, NOT those that work with X10RF).
    • Here you can find which X10 product can be replaced by Insteon products: https://www.intellihome.be/en/kbase/X10_Home_Automation/What_are_the_alternatives_for_X10_products_that_are_End_of_Life_.html
    • The HUB+ by Insteon can also transmit X10 signals, but this signal is much weaker than the signal. To solve this problem you can use a X10 PLR11 amplifier micromodule. You can read more about it here: https://www.intellihome.be/en/kbase/INSTEON/What_is_the_transmission_power_of_the_Insteon_HUB_.html
    • Wich X10 products can work with the Insteon HUB+. Read more about it here: https://www.intellihome.be/nl/kbase/INSTEON/Welke_X10_S10_Xanura_ebode_modules_kunnen_samenwerken_met_de_Insteon_HUB_.html
    • Would you rather switch to Z-Wave and still want to use X10 (for a while) then click on the following link: https://www.intellihome.be/en/kbase/Z-Wave_Home_Automation/Can_you_use_X10_and_Z-Wave_together_.html

     

    Read more
  4. I forgot my password, how can I set it back?

    For that you can perform a factory reset. You do this by holding down the reset button for 10 seconds. Then the password is reset and you can enter a new.

    Read more
  5. What Foscam IP cameras can be used with HA controllers?

    Certain HA-controllers like those from Fibaro, Homeseer, Vera,… get a MJPEG stream from the Foscam IP cameras by using a http URL te gebruiken instead of the standaard HD ONVIF or RTSP stream. 

    Some Foscam HD models work with this MJPEG stream. Below you will find an overview of the models that support MJPEG:

    To set up the camera to deliver a MJPEG stream you can do it like this:

    http://ipaddress:port/cgi-bin/CGIProxy.fcgi?cmd=setSubStreamFormat&format=1&usr=username&pwd=password

    example:
    http://192.168.15.163:88/cgi-bin/CGIProxy.fcgi?cmd=setSubStreamFormat&format=1&usr=admin1&pwd=admin1

    Once set up; you can use the URL in this format to capture the stream:

    http://ipaddress:port/cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=username&pwd=password

    example:

    http://192.168.15.163:88/cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=admin1&pwd=admin1  

    The following Foscam IP camera models support MJPEG stream at the time of publication of this article. For the time being; models that has H.264 as stream can not be used with these controllers. 

    FI9821W V2, FI9818W V2, FI9831W, FI9826W, FI9821P, FI9831P, FI9826P,FI9805W,

    FI9804W, FI9805E, FI9805P, FI9805EP, FI9828W, FI9828P, FI9828P V2, FI9903P

    All firmware

    FI9821W V2.1, FI9821P V2, FI9831P V2, FI9826P V2,FI9821EP,FI9803EP, FI9803P,

    FI9851P, FI9853EP, FosBaby, FosBaby P1

    All firmware.
    FI9831P V2, FI9826P V2 witht firmware 2.*.2.18 do not work

     

    FI9816P, FI9803P V2, C1, FI9800P, FI9800XE, C1 Lite

    Does not work

    C2, R2, R4, FI9900P,FI9900EP,9901EP,9961EP

    Does not work

    Read more
  6. What is IFTTT?

    IFTTT, or "If This Then That" to give it its' full name, is a web based "Cloud" service that allows you to create simple logic using conditional statements called "recipes".

    These “recipes” are triggered by events from other Cloud services (called "channels") such as Gmail, Facebook, Instagram, Dropbox or Twitter.

    By using IFTTT in your Home Automation system you can bring together devices that would otherwise be unable to be used together - for example Philips Hue, Honeywell Evohome, Nest, Netatmo and many more!

    Read more
  7. Do you wish to continue with X10? Here are a few tips.

     

    Read more
  8. Which Z-Wave frequency is used in my country?

     

    List of Z-Wave frequencies in each country.

     

    Read more